2CSK289601R1902 ABB TR/U 1.1.CH

অংশ সংখ্যা	2CSK289601R1902
ব্র্যান্ড	ABB
জীবনচক্র	সক্রিয়
মাউন্ট পদ্ধতি	Surface mounting
ইনপুট ফ্রিকোয়েন্সি	240 Pixel
ব্যাটারিতে তরঙ্গ ফর্ম	240 Pixel
ব্যাটারি অপারেশন ফ্রিকোয়েন্সি	240 Pixel
সাধারণ রিচার্জ সময়	240 Pixel
রঙ	240 Pixel

ABB 2CSK289601R1902 প্রযুক্তিগত বৈশিষ্ট্য, গুণাবলী, পরামিতি।

The "transponder reader" is a flush-mounting device designed to realize access control systems with a communication support based on KNX bus. It is equipped with one relay (4A @24 V AC/DC) and one input to be used for connecting external conventional card-holder. The output can be programmed in three different ways: "Linked to access control", receiving in this case switching commands from the device itself (according to transponder card validation); being a standard KNX Switch actuator output, able to be controlled by every KNX standard devices; "linked to card-holder", that means that the relay is switched according to closing/opening internal input contact available on transponder reader. The bicolor (red-green) LED placed on the front of the device allow you to monitor device operation and can be also switched ON/OFF in the proper color according to KNX telegram (for example for DND/MUR purposes). The transponder reader can be configured with MiniMAC software in order to behave as transponder programming device. The transponder reader requires a 12...24 V AC/DC external power supply to ensure its operation even with bus voltage failure.